Skip to main content
5+ Years Industrial Coating Experience

Epoxy Flooring Edmonton Built for Alberta Winters

Garage floors, basements, and shops coated to survive Alberta. Hot tires, road salt, oil, and daily abuse. Every floor diamond-ground, moisture-tested, and backed in writing.

5.011 Google reviews
Up to 10-Year Warranty
Owner NACE/AMPP Certified
Serving Edmonton & Surrounding Areas
Moisture Tested
Diamond Ground
Crack Repaired
Warranty Backed

What We Coat

Garages, basements, shops, patios. Pick your surface.

How Every Floor Gets Done

Four phases, same approach on every job. The details change. The prep never does.

1

Assess

We evaluate concrete hardness, surface condition, existing coatings, and moisture. Comparative moisture readings identify whether a dedicated moisture-vapor barrier primer is required before coating.

2

Prepare

Surfaces are mechanically diamond-ground with dust-extracted industrial equipment to create an open surface profile. Pits, spalls, and cracks are repaired with rigid structural fillers to create a flat, sound substrate.

3

Build

The specified coating system is installed layer by layer according to manufacturer cure windows: moisture-blocking primer (if required), 100% solids base coat, and specified decorative broadcast.

4

Seal

A protective clear finish seals the aggregate or pigment: UV-stable polyaspartic for garage flake, chemical-resistant urethane for solid colours, or specialized protective sealers for metallics and polished concrete.

From Cracked Concrete to Showroom Floor

Our coating systems do not just paint over concrete. We repair cracks and profile the slab so you get a durable, seamless surface that holds up to daily use.

  • Fill and repair cracks before coating
  • Resists oil, gas, brake fluid, and salt
  • One-mop cleanup with zero concrete dusting
  • Reflective finish that brightens overall garage lighting
Browse Our Project Gallery
Finished Blacktop flake epoxy garage floorBare, cracked concrete garage floor before coating
BeforeAfter

Blacktop flake garage, drag to compare

Completed charcoal flake epoxy garage floor with dramatic overhead lighting

Real garage. Real floor. No showroom tricks.

Why Edmonton Homeowners Choose Epoxy Empire YEG

Edmonton is one of the hardest places in Canada on a concrete floor. Months of freeze-thaw cycling, road salt and sand dragged in on winter tires, chinook melt water, and summer heat swings all attack the same slab. Coatings fail here when prep is rushed or the chemistry is wrong. Peeling edges, hot-tire pickup, and bubbling are almost always mechanical bond failures from improper diamond grinding or hidden moisture. That's why every floor we install starts with industrial diamond grinding and professional moisture testing before a drop of coating is poured.

At Epoxy Empire YEG, we install engineered coating systems, not paint jobs. For garages we run a hybrid system: a 100% solids epoxy base for deep substrate penetration and bond strength, finished with a high-solids polyaspartic clear coat for hot-tire and chemical resistance. High-traffic shops and gyms get double-broadcast quartz. Basements and showrooms get hand-designed metallic finishes (interior only). Exterior patios, steps, and pool decks get decorative broadcast systems specified to the slab, exposure, and traction requirements of the project. Every system is installed to manufacturer technical data sheets. That means verified concrete moisture levels, full broadcast saturation, and proper intercoat cure windows.

We back it in writing: floor coatings carry up to a 10-year warranty with clear terms before we start, and our 5.0-star Google rating comes from homeowners right here in the Greater Edmonton Area: Edmonton, Sherwood Park, St. Albert, Spruce Grove, and beyond. If you're comparing contractors, start with the numbers: our Edmonton epoxy floor cost guide breaks down real pricing by garage size, and the project gallery shows the finished work. Ready to see options? Browse our coating systems or get a free quote.

How We're Different

Industrial background, residential care. The short version:

We Test First

Every project starts with moisture testing. If the concrete has issues, we address them before coating, not after it fails.

Real Prep, Real Results

We diamond grind every floor to create proper adhesion. No acid etching shortcuts that lead to peeling and callbacks.

No Thin Spots

Full broadcast means complete flake rejection. We saturate the wet base until no bare spots remain, leaving a uniform, durable floor.

We Stand Behind It

Warranty-backed work with clear terms upfront. If something goes wrong due to our workmanship, we make it right.

Clean Crews, Clear Communication

We show up on time, keep the workspace tidy, and keep you informed. No surprises, no mess left behind.

Local & Accessible

Based in Edmonton, serving the greater area. Questions after install? We're a call away, not a distant call center.

Common Questions

Straight answers, no sales pitch.

Get a Price on Your Floor

Free quotes, most back within 24 hours. No obligation, no sales pressure.